Shot peening, also known as shot blasting, is a cold work process used to finish metal parts to prevent fatigue and stress corrosion failures and prolong product life for the part. In Shot peening, small spherical bonds bombard the surface of the part to be finished. The shot acts like a peen hammer, dimpling the surface and causing compression stresses under the dimple. As the media continues to strike the part, it forms multiple overlapping dimples throughout the metal surface being treated. The surface compression stress strengthens the metal, ensuring that the finished part will resist fatigue failures, corrosion fatigue and cracking, and galling and erosion from cavitation.
In other words,it is a surface enhancement method for improving the fatigue strength of metals near the surface of the component, shot peening is performed by impacting part surfaces with spherical shot particles to induce compressive residual stresses.
How Does Shot Peening Work?
Compressive Stresses act as a counterbalance to the tensile surface stresses present in many metallic components, and they inhibit the initiation and propagation of fatigue cracks that occur under service loads. Shot peening extends the fatigue life of metal parts by enhancing their resistance to corrosion, erosion, stress corrosion cracking, foreign object damage and fretting fatigue, while work-hardening part surfaces to enhance their resistance to wear.
Shot Peening Methods
There are several popular methods for delivering shot media to the target workpiece:
- Wheel Blasting – Blast wheels utilize rapidly spinning paddles to propel shot media via centrifugal force. Wheel blast machines can deliver high volumes of shot media at high velocities, and are typically used for peening large, flat surfaces.
- Air Blasting – Air blast systems propel shot media using a stream of high-pressure air. The shot particles are accelerated through a nozzle, providing more precise application than wheel blast systems. Some systems incorporate water or liquid lubricants into the blast stream to enhance the surface finish of the target workpiece.
- Flapper Peening – Rotary flap peening is performed using rubberized fabric flaps with embedded shot media attached to a rotating shaft. As the shaft spins rapidly, the flaps repeatedly impact the target – peening the material with constrained shot media. Flapper peening is a controlled method typically applied to small areas or repaired parts.
Shot Peening Media & Particles
Shot media is typically 1/8th of an inch or less in diameter, and is rated by size, shape, hardness, density, and durability. Effective peening requires shot media of consistent shape and hardness, so shot particles are often sorted and separated using mechanical shakers to remove nonconforming pieces. Some shot material can be reused for multiple treatments, but all shot media will eventually degrade and fracture over time.
Shot media is selected based on the material characteristics and geometry of the part being treated. Metallic shot media may be composed of copper, steel, aluminum or other alloys, but shot media must be at least as hard as the workpiece to induce plastic deformation.
Exploring the Wide Range of Shot Blasting Machines Offered by Indian Manufacturers
Sustainable Practices by Shot Blasting Machine Manufacturers
Conquer Surface Imperfections with AeroWheel's Airless Swing Table Shot Blasting Machine
Common types of shot media include:
- Cast Steel Shot
- Glass Bead Shot
- Ceramic Bead Shot
- Cut Wire Shot
While shot peening remains a popular surface enhancement method, fatigue strength improvements are proportional to the magnitude and depth of induced compressive residual stresses in a treated component. Laser Peening has proven to impart compressive residual stresses up to ten times deeper than those achieved with shot peening, and laser peening has demonstrated service life extensions superior to any other fatigue enhancement method.
